【欧洲杯下注】


正在开展的国际标准项目


发布时间: 2010-10-26 11:02:46   作者:本站编辑   来源: 本站原创

截止到2009年底,ISO/TC 156已批准并发布了55项国际标准。目前正在开展的有22项国际标准

项目,具体项目见下表。

序号

标准号

标准名称

1.          

ISO/WD 7441

Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests 

2.          

ISO/CD 7539-1

Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures 

3.          

ISO/CD 7539-11

Corrosion of metals and alloys -- Stress corrosion cracking -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen assisted cracking 

4.          

ISO/WD 8044:1999/ Amd 1

Corrosion of metals and alloys -- Basic terms and definitions -- Amendment 1

5.          

ISO/DIS 8565

Metals and alloys -- Atmospheric corrosion testing -- General requirements 

6.          

ISO/DIS 9223

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation

7.          

ISO/DIS 9224

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories  

8.          

ISO/DIS 9225

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres 

9.          

ISO/DIS 9226

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity 

10.      

ISO/NP 11846

Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 

11.      

ISO/CD 13573

Corrosion of metals and alloys -- Test method for thermal cycling exposure testing under high temperature corrosion conditions for metallic materials 

12.      

ISO/CD 14802

Corrosion of metals and alloys -- Guidelines for applying statistics to analysis of corrosion data 

13.      

ISO/DIS 15158

Corrosion of metals and alloys -- Method of measuring the pitting potential for stainless steels by potentiokinetic control in sodium chloride solutions

14.      

ISO/WD 16203

Corrosion of metals and alloys -- Guidelines for selection of methods for erosion-corrosion testing in flowing liquids 

15.      

ISO/WD 16208

Corrosion of metals and alloys -- Test method for corrosion of materials by electrochemical impedance measurements

16.      

ISO/WD TR 16335

Corrosion of metals and alloys -- Corrosion tests in artificial atmospheres -- Guidelines for selection of accelerated corrosion test for product qualification

17.      

ISO/CD 16701

Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 

18.      

ISO/DIS 17474

 Corrosion of metals and alloys -- Conventions applicable to electrochemical measurements in corrosion testing 

19.      

ISO/CD 17752

Corrosion of metals and alloys -- Procedure to determine run off rates of metals from materials as a result of atmospheric corrosion

20.      

ISO/CD 21601

Corrosion of metals and alloys -- Guidelines for assessing the significance of stress corrosion cracks detected in service

21.      

ISO/CD 21608

Corrosion of metals and alloys -- Test method for isothermal Exposure oxidation testing under high temperature corrosion conditions for metallic materials 

22.      

ISO/CD 26146

Corrosion of metals and alloys -- Method for metallographic examination of samples after exposure to high temperature corrosive environments 

 


附件下载

网站地图
友情链接:亚博app  乐鱼体育登陆  宝博app登陆  NBA买球软件  亚傅体育app